Z-Flash OBD Ford: How to Install Module

The Z-Flash for Ford vehicles is an easy to use OBD-II based flasher. 

1. Connect the module into the vehicle’s OBD-II port. The OBD-II port is located under the dashboard on the driver’s side.
2. Start your vehicle.
3. The module will begin to boot and the LED will flash for 5 seconds. 
4. When the module is ready to use the green LED will flash for 5 seconds and then turn off. 
5. If you need to disconnect the module and plug it back in, you will need to follow the boot sequence again