How to Change Module in Feniex Fusion Stick
Here's how to change out the stick modules:
1. Unscrew the end cap from either side of the stick light.
2. Slide out all the modules until you are up to the module you are looking to change/replace, (making sure you are keeping track of the order your modules are in when sliding them out).
3. Unclip the module you are replacing and clip the new module in to the same cord.
4. Test the light to make sure all modules are working properly before sliding all the modules back in to place.
5. Make sure you put the modules back in the same order you took them out to ensure all the modules light up in the same order.
6. Screw the end cap back onto the stick light.