UBL Dual Slim Dash Light

How to Install the UBL Dual Slim Dash Light:

  1. Use the included screws that are attached to the bar to attach the L brackets. If you choose, the suction cups can be removed and replaced with a screw or bolt.
  2. Plug the cigarette lighter plug in and turn it on.
  3. To change the pattern, there is a small push button on the back in the center of the light. Hold it down for 1-2 seconds and then release.
  4. The brackets can be adjusted to mount the light at nearly any angle. If you cannot find the angle you need, switch the sides the brackets are on to unlock more mounting options.
  5. If needed, you may attach the mounting brackets with just one bolt on each side securely tightened to unlock additional mounting options.

Please note, the removal of any included cigarette lighter plugs will void this warranty.

Still need help? Contact Us Contact Us