UBL U-Lite 2X Dash Light

Here’s how to hardwire the UBL U-Lite 2X Dash Light:

  1. Cut the cigarette lighter plug off.
  2. Connect the red wire to +12V of power. Attach a switch to power the lights on and off.
  3. Connect a fuse within 1 foot of your power source to protect the light.
  4. Connect the black wire to ground.
  5. Connect the yellow wires to a momentary switch to change the pattern or set the light to your desired pattern and tape the wire off.

Still need help? Contact Us Contact Us