Feniex Fusion Visor Bar

Single Color Fusion Visor Bar Wiring Diagram:

  • Black: Ground 12V(-)
  • Red: 12V (+)
  • White: Takedown
  • Yellow: Flash Mode
  • Green: Takedown Flash
  • Blue: Left Arrow
  • Gray: Right Arrow
  • Brown: Mode 1
  • Gray/Blue: Center Out

Dual Color Fusion Visor Bar Wiring Diagram:

  • Black: 12V (-)
  • Red: 12V (+)
  • White: Flood
  • Yellow: Flash Mode
  • Green: Mode 2
  • Blue: Left Arrow
  • Gray: Right Arrow
  • Brown: Mode 1
  • Gray/Blue: Center Out

*Takedown steady overrides takedown flashing*

Activate takedown flashing for dual color:

  1. Connect the black wire to the battery’s 12V(-) ground.
  2. Select the wire that will be set as the takedown flashing mode wire (green or brown).
  3. Twist the selected mode wire (green or brown), red, white, and yellow wires together.
  4. Power the light bar on by connecting the twisted wires to the battery’s positive (+). Once activated, the takedown steady function will engage.
  5. To verify takedowns are flashing, disconnect the white wire from power.
  6. Repeat steps 1 through 3 to deactivate takedown flashing.
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us