How to Wire Feniex Fusion 400/600/800

Here’s how to hardwire the Feniex Fusion 400, 600, 800, and Rocker Panels:

1. Extend the red (12V+) to the 12V+ post of the vehicle’s battery. Attach the black wire (12V-) to the ground post of the vehicle’s battery.
2. Connect the brown wire to a 12V+ source.
3. Tap the yellow wire to the 12V+ source to change the patterns.
4. For the left arrow function, connect the blue wire to a 12V+ post (switch). To select a pattern, engage the blue wire to a 12V+ source and momentarily connect the yellow wire on a 12V+ source to select the pattern.
5. For the right arrow function, connect the gray wire to a 12V+ post (switch). To select a pattern, engage the gray wire to a 12V+ source and momentarily connect the yellow wire on a 12V+ source to select the desired pattern.
6. Center out directional: connect both gray and blue wires to a 12V+ post (switch). To select a pattern, attach the blue and gray wire to a 12V+ source and momentarily connect the yellow wire on a 12V source.
7. Takedown Steady Function: Connect the white wire to a 12V+ post (switch).
8. Takedown Flashing function: Connect the green wire to a 12V+ post.